METER / GAUGE SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



METER GAUGE
*1: w/o Navigation System
*2: w/ Navigation System
*3: w/ AFS

E113242E01


METER GAUGES 
Item
Detail
Speedometer
Indicates the vehicle speed receiving a signal from the ABS & traction actuator assembly. (Direct Line)
Power Meter Gauge
Hybrid vehicle control ECU transmits power meter signal to the combination meter assembly. (Direct Line)
Engine Coolant Temperature Receiver Gauge
Indicates the engine coolant temperature receiving a signal from the ECM. (CAN)
Fuel Gauge
Receives the fuel signal from the fuel sender gauge. (Direct Line)

WARNING/INDICATOR 
Item
Detail
TURN SIGNAL
Receives the turn signal from the turn signal flasher. (Direct Line)
BEAM
Receives the beam signal from the body ECU. (BEAN)
CHARGE
Receives the charge malfunction signal from the hybrid vehicle control ECU. (CAN-BEAN)
CHECK E/G
Receives the check engine malfunction signal from the hybrid vehicle control ECU. (Direct Line)
DOOR
Open door indicator light comes on receiving a door condition signal from the body ECU. (BEAN)
D-BELT
Receives the driver side seat belt signal from the airbag sensor assembly center. (BEAN)
P-BELT
Receives the passenger side seat belt signal from the occupant detection sensor (Direct Line) and transmits the passenger side seat belt condition signal to the integration control & panel assembly (*1) (BEAN)/multi-display (*2). (AVC-LAN)
TAIL
Receives the taillight signal from the body ECU. (BEAN)
A/T SHIFT
Receives the A/T shift condition signal from the park/neutral position switch and hybrid vehicle control ECU. (CAN-BEAN)
FUEL
Receives the fuel signal from the fuel sender gauge. (Direct Line)
ABS
Receives the ABS signal from the ABS & traction actuator assembly. (CAN-BEAN)
SLIP
Receives the SLIP signal from the ABS & traction actuator assembly. (CAN-BEAN)
ECB
Receives the ECB signal from the ABS & traction actuator assembly. (CAN-BEAN)
BRAKE
Receives the brake signal from the ABS & traction actuator assembly. (CAN-BEAN)
CRUISE
Receives the cruise signal from the hybrid vehicle control ECU. (CAN-BEAN)
AIRBAG
Receives the airbag signal from the airbag sensor assembly center. (BEAN)
Fr FOG
Receives the front front fog signal from the body ECU.
Rr FOG
Receives the front rear fog signal from the body ECU.
AFS OFF (*3)
Receives the AFS OFF signal from the AFS ECU. (BEAN)
P/S
Receives the P/S signal from the EMPS ECU. (CAN-BEAN)
READY
Receives the ready signal from the hybrid vehicle control ECU. (CAN-BEAN)
MAIN BATTERY
Receives the main battery signal from the hybrid vehicle control ECU. (CAN-BEAN)

HINT:
  1. The multi-information display has been located in the center of the combination meter assembly.
  2. The display shows a message or animation for each of the functions described in the table below.


MULTI-INFORMATION DISPLAY 
Item
Detail
Door warning
When a door (driver/passenger/rear left/rear right and back) of the vehicle is opened or closed, this item displays a warning message and animation to inform the driver of the condition of the door.
Refueling display
Displays the refueling standby or refueling allowed state by way of the sealed tank system.
ODO/TRIP display
This display switches between odometer, trip meter A, and trip meter B in accordance with the operation of the ODO/TRIP switch.
Energy monitor display
  1. Energy monitor indicates the energy transmission direction for checking the current drive method (engine, motor or both), the power generation status by the engine and status of regenerative energy use.
  2. The status of change of the battery can be checked on the meter with an 8 - stage display, which is provided in the battery illustration.
Outside temperature display
Displays the outside temperature in accordance with the ambient temperature signal from the A/C control ECU.
Instant fuel consumption
  1. Displays the value that has been calculated by the meter CPU, which is based on the driven distance and the fuel consumption volume (fuel injection No.1 injector), provided that the ignition switch is turned ON.
  2. The display updates every 0.5 seconds.
Average fuel consumption
  1. Displays the value that has been calculated by the meter CPU, which is based on the driven distance and the fuel consumption volume after the INFO button has been pressed 0.8 second or longer.
  2. The display updates every 10 seconds.
Warning message
Illuminates or blinks the master warning light and displays a warning message for each type of system failure.
DTC (Diagnostic Trouble Code) display
Displays the DTCs pertaining to the VSC function.

INTEGRATION CONTROL & PANEL ASSEMBLY (W/O NAVIGATION SYSTEM)/MULTI-DISPLAY (W/ NAVIGATION SYSTEM)
*1: w/o Navigation System
*2: w/ Navigation System

E113235E01

HINT:
  1. Integration control & panel assembly (*1) consists of three parts (trip information display, passenger indicator light, and heater control panel). These areas display the contents given in the table below.
  2. Multi-display assembly (*2) consists of four parts (navigation display, passenger seat belt warning light, clock display, and heater control panel). These areas display the contents given in the table below.


Item
Detail
Passenger information display
Displays the condition of the passenger seat belt ON/OFF.
Heater control panel
Displays the condition of the heater control panel.
Trip information display
  1. Displays the item below.
    1. Outside temperature
    2. Clock display
    3. Average fuel consumption
    4. Instantaneous fuel consumption
    5. Driving distance
    6. Elapsed time
Clock display (*2)
Displays the time.
Navigation display (*2)
Displays the navigation data and trip information data.

Multi-Information Display Flow Chart
*1: w/ Sliding Roof Control System
*2: The display immediately before turning the ignition switch off will appear when the ignition switch is turned to the ON position.
*3: The display is switched in order shown above by pushing the "DISP" switch on the steering pad switch.
*4: If the abnormal condition is detected, the warning display appears immediately. (w/ buzzer)

E113236E01


MAINTENANCE MODE

E110599

HINT:
MAINTENANCE MODE is the secret mode (Click here).


DIAGNOSIS SYSTEM

E110620

HINT:
  1. The multi-information display shows "DIAG" when the ignition switch is turned to the ON position (Click here).
  2. Diagnosis checks for the VSC system can be done by using the displayed items is in the multi-information display.