METER / GAUGE SYSTEM > FAIL-SAFE CHART

for Preparation Click here

ENGINE COOLANT TEMPERATURE GAUGE
Condition	Response	Recovery
Engine coolant temperature data is interrupted for 5 seconds.	The gauge needle indicates below "°C".	Engine coolant temperature data is received.

SHIFT INDICATOR
Condition	Response	Recovery
"P" to "D" data is interrupted for 3 seconds.	All indicator lights go off.	Normal data is received.
"B" data is interrupted for 3 seconds.	The "B" indicator light goes off.	Normal data is received.

ABS & BRAKE
Condition	Response	Recovery
ABS & brake data is interrupted for 3 seconds.	The warning light comes on.	Normal data is received.

DOOR
Condition	Response	Recovery
Regular data is interrupted.	The data received most recently remains indicated.	Normal data is received.

POWER STEERING
Condition	Response	Recovery
P/S data is interrupted for 3 seconds..	The indicator light comes on.	Normal data is received.

TAIL
Condition	Response	Recovery
Regular data is interrupted.	The data received most recently remains indicated.	Normal data is received.

BEAM
Condition	Response	Recovery
Regular data is interrupted.	The indicator light goes off.	Normal data is received.

AIRBAG
Condition	Response	Recovery
Airbag data is interrupted for 10 seconds or there is a malfunction in the combination meter (meter CPU).	The warning light comes on.	Normal data is received.

ILLUMINATION
Condition	Response	Recovery
The illumination data is interrupted for 10 seconds or abnormal data is received.	The display remains in daytime mode.	Normal data is received.

MULTI-INFORMATION DISPLAY
Condition	Response	Recovery
Cruise information data is interrupted for 60 seconds.	The display becomes blank (only measurement units displayed).	Normal data is received.
Energy flow data is interrupted for 2 seconds.	The energy flow display becomes blank. (Cursor does not appear.)	Normal data is received.
The battery data is interrupted for 2 seconds.	The display before receiving the data is displayed.	Normal data is received.