POWER WINDOW CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customize operations.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization. (Example: For the symptom "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


POWER WINDOW:

DISPLAY (ITEM)
DEFAULT CONTENTS
CONTENTS
SETTING
UP/DOOR KEY (Door key linked P/W UP)
ON
Function that enables all power windows to move up manually, via manual operation, when driver side door key cylinder is held in lock position for 1.5 seconds when ignition switch is off.
ON/OFF
DOWN/DOOR KEY (Door key linked P/W DOWN)
ON
Function that enables all power windows to move down manually, via manual operation, when driver side door key cylinder is held in unlock position for 1.5 seconds when ignition switch is off.
ON/OFF
DOWN/WIRELESS (P/W DOWN w/ transmitter)
ON
Function that enables all power windows to move down manually, via manual operation, when unlock switch on transmitter is held for 1.5 seconds when ignition switch is off.
ON/OFF
UP/WIRELESS (P/W UP w/ transmitter)
ON
Function that enables all power windows to move up manually, via manual operation, when lock switch on transmitter is held for 1.5 seconds when ignition switch is off.
ON/OFF