REAR SEAT ASSEMBLY (for LH Side) > REASSEMBLY

for Preparation Click here



1. INSTALL REAR SEAT TRACK ASSEMBLY INNER


2. INSTALL REAR SEAT TRACK ASSEMBLY OUTER


3. INSTALL REAR SEAT TRACK ADJUSTING HANDLE


4. INSTALL FOLD SEAT CUSHION FRAME NO.1

  1. Install the 2 fold seat cushion frame No.1 with the 4 nuts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



5. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LOWER

  1. Using a "torx" socket wrench (T45), install the rear seatback frame sub-assembly lower with the 5 "torx" bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



6. INSTALL RECLINING CONTROL LINK SUB-ASSEMBLY

  1. Install the reclining control link sub-assembly with the 4 nuts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the spring and a new E-ring.



7. INSTALL SEAT TRACK STOP PLATE

  1. Install the seat track stop plate with the 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Install the 2 seat track stop plate cables.

  1. Install the clamp.



8. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY

  1. Using a "torx" socket wrench (T45), install the rear seatback frame sub-assembly with the 4 "torx" bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



9. INSTALL REAR SEAT RECLINING CONTROL NO.2 CABLE


10. INSTALL REAR SEAT COVER NO.2


11. INSTALL REAR SEAT RECLINING COVER INNER LH


12. INSTALL FOLD SEAT STOPPER BAND ASSEMBLY NO.2


13. INSTALL REAR SEATBACK PAD


14. INSTALL SEPARATE TYPE REAR SEATBACK COVER


    B050126E02

  1. Using hog ring pliers, install the separate type rear seatback cover to the rear seatback pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



15. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

  1. Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly.

  1. Install the hook and new hog rings.

  1. Install the rear seat belt hook with the bolt.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }

  1. Install the 2 clips.



16. INSTALL REAR SEAT HEADREST SUPPORT


17. INSTALL REAR SEAT HEADREST SUPPORT


18. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


19. INSTALL REAR SEATBACK LOCK STRIKER COVER


20. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY


21. INSTALL REAR SEATBACK COVER


22. INSTALL REAR SEAT HEADREST ASSEMBLY


23. INSTALL REAR SEAT BELT ASSEMBLY INNER


    B109594

  1. Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



24. INSTALL REAR SEAT CUSHION PAD


25. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER


    B050126E02

  1. Using hog ring pliers, install the separate type rear seat cushion cover to the rear seat cushion pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



26. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY


27. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY

  1. Install the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Install the 2 rubber bands on the backside of the rear seatback board carpet assembly.

  1. Using a "torx" socket wrench (T45), install the separate type rear seat cushion assembly with the 2 "torx" bolts.

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



28. INSTALL REAR SEAT CUSHION MOULDING REAR LH


29. INSTALL REAR SEAT CUSHION MOULDING LH