AXLE SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here

If there is no DTC output but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to relevant troubleshooting page.
Inspect the fuse before inspecting the circuits shown in the chart below.
Inspect each malfunctioning circuit in numerical order for the corresponding symptoms.

AXLE CONTROL SYSTEM
Symptom	Suspected area	See page
"CHECK AWD SYSTEM" is displayed	1. Check DTC again and make sure that the DTC is not output	Click here
	2. CAN communication system	Click here
	3. Multiplex communication system	Click here
	4. Hybrid control system	Click here
	5. Brake control system	Click here
	6. AWD warning circuit	Click here
	7. Skid control ECU	Click here
	8. HV control ECU	Click here

Use the table below to help find the cause of the problem. Check each part. If necessary, replace these parts.