VVT SENSOR > INSPECTION

for Preparation Click here



1. INSPECT VVT SENSOR


    A108286E01

  1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

    Standard resistance :
    Condition
    		Specified Condition
    Cold
    		835 to 1,400 Ω
    Hot
    		1,060 to 1,645 Ω

    NOTICE:
    1. "Cold" and "Hot" mean the temperature of the coils themselves.
    2. "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

    If the resistance is not as specified, replace the sensor.