CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE ENGINE ROOM SIDE LH COVER


    A108719

  1. Using a clip remover, remove the engine room side cover.



2. REMOVE ENGINE ROOM COVER SIDE


    A109835

  1. Remove the 5 clips and engine room cover side.



3. REMOVE COOL AIR INTAKE DUCT SEAL

  1. Remove the 4 clips and cool air intake duct seal.



4. REMOVE AIR CLEANER CAP W/ INLET


    A106877E01

  1. Disconnect the 4 clamps.

  1. Remove the 2 bolts and air cleaner cap w/ inlet.

  1. Remove the air cleaner element from the air cleaner case.



5. REMOVE AIR CLEANER CASE W/ RESONATOR


    A109893

  1. Separate the ventilation hose No.2.



    A109270

  1. Disconnect the MAF meter connector.

  1. Disconnect the 2 wire harness clamps from the air cleaner.



    A106878

  1. Remove the 5 bolts from the air cleaner case w/ resonator.



    A109570

  1. Remove the hose clamp, and separate the air cleaner hose No.1.

  1. Remove the air cleaner case w/ resonator.



6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)


    A111110

  1. Disconnect the oil control valve connector.

  1. Remove the bolt and oil control valve.



7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)


    A111109

  1. Disconnect the oil control valve connector.

  1. Remove the bolt and oil control valve.