CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch ON.

  1. Start the engine and warm it up.

  1. Select the intelligent tester from the ACTIVE TEST menu.

  1. Check the engine speed when the OCV is operated by the intelligent tester.

    Standard:
    Condition
    		Specified Condition
    VVT system is OFF (OCV is OFF)
    		Normal engine speed
    VVT system is ON (OCV is ON)
    		Rough idle or engine stalled