CRANKSHAFT POSITION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT CRANKSHAFT POSITION SENSOR


    A108285

  1. Using an ohmmeter, measure the resistance between the terminals.

    Standard resistance:
    Temperature
    		Specified Condition
    Cold
    		1,630 to 2,740 Ω
    Hot
    		2,065 to 3,225 Ω

    NOTICE:
    1. "Cold" and "Hot" mean the temperature of the coils themselves.
    2. "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

    If the resistance is not as specified, replace the sensor.