CANISTER > INSTALLATION

for Preparation Click here



1. INSTALL CHARCOAL CANISTER ASSEMBLY


    A115532E02

  1. Connect the clamp to the charcoal canister bracket (A).

  1. Install the bracket clip (B).

  1. Install the charcoal canister assembly with the 4 bolts (C).

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }



    A115531E02

  1. Install the tube to the tube clamp (D).

  1. Connect the charcoal canister outlet hose No.1 to the charcoal canister assembly (E).

  1. Connect the charcoal canister hose (F).



2. CONNECT FUEL TANK TO CANISTER TUBE SUB-ASSEMBLY


    A112348

  1. Install the fuel tank to canister tube sub-assembly to the clamp.



    A112362E01

  1. Connect the fuel tank to canister tube sub-assembly.

  1. Push the fuel tube connector into the pipe until the fuel tube connector makes a "click" sound.

    NOTICE:
    1. Check for any damage or foreign objects on the connected part.
    2. After connecting, check that the fuel tube connector and the pipe are securely connected by trying to pull them apart.



3. INSTALL CHARCOAL CANISTER PROTECTOR


    A112347

  1. Install the charcoal canister protector with the 3 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }