AIR FUEL RATIO SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1)

  1. Temporarily tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly.

    NOTICE:
    Do not to damage the air fuel ratio sensor.



    A109931E01

  1. Using SST, fully tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }



    A109930

  1. Connect the air fuel ratio sensor connector and clamp.



2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2)

  1. Temporarily tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly No.2.

    NOTICE:
    Do not to damage the air fuel ratio sensor.



    A108671E01

  1. Using SST, fully tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly No.2.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }

  1. Connect the air fuel ratio sensor connector and clamp.