AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)


    A109930

  1. Disconnect the air fuel ratio sensor connector and clamp.



    A109932E01

  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

    SST
    09224-00010  

    NOTICE:
    Do not to damage the air fuel ratio sensor.



2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)

  1. Disconnect the air fuel ratio sensor connector and clamp.



    A108672E01

  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly No.2.

    SST
    09224-00010  

    NOTICE:
    Do not to damage the air fuel ratio sensor.