HEATED OXYGEN SENSOR > INSPECTION

for Preparation Click here



1. INSPECT OXYGEN SENSOR (for Bank 1)


    A082934E01

  1. Measure the resistance between terminals 1 (HT) and 2 (+B).

    Standard resistance:
    Condition
    		Specified Condition
    20°C (68°F)
    		11 to 16 Ω

    If the resistance is not as specified, replace the sensor.



2. INSPECT OXYGEN SENSOR (for Bank2)


    A080122E02

  1. Measure the resistance between terminals 1 (HT) and 2 (+B).

    Standard resistance:
    Condition
    		Specified Condition
    20°C (68°F)
    		11 to 16 Ω

    If the resistance is not as specified, replace the sensor.