HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE OXYGEN SENSOR (for Bank 1)


    A108663

  1. Disconnect the oxygen sensor connector and clamp.



    A108664E01

  1. Using SST, remove the oxygen sensor from the exhaust pipe assembly front No.3.

    SST
    09224-00010  

    NOTICE:
    Do not to damage the oxygen sensor.



2. REMOVE OXYGEN SENSOR (for Bank 2)


    A108666

  1. Disconnect the oxygen sensor No.2 connector.



    A108680E01

  1. Using SST, remove the oxygen sensor No.2 from the exhaust pipe assembly front.

    SST
    09224-00010  

    NOTICE:
    Do not to damage the oxygen sensor.