REAR CENTER SEAT OUTER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT TRACK BRACKET COVER INNER
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


2. REMOVE REAR SEAT ASSEMBLY RH
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


3. REMOVE REAR SEATBACK COVER (for 60/40 Split Seat Type)


    B115708

  1. Using a moulding remover, disengage the 8 claws and remove the 2 rear seatback covers.



4. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (for 60/40 Split Seat Type)


    B068346E01

  1. Release the 4 rubber bands on the backside of the rear seatback board carpet assembly.

  1. Disengage the 6 clips and remove the rear seatback board carpet assembly.



5. REMOVE RECLINING COVER PROTECTOR LH
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


6. REMOVE CENTER SEAT HINGE COVER UPPER LH
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


7. REMOVE CENTER SEATBACK ASSEMBLY (for 60/40 Split Seat Type)

  1. Remove the screw.

  1. Using a "torx" socket wrench (T45), remove the 2 "torx" bolts.

  1. Remove the 3 bolts and center seatback assembly.



8. REMOVE CENTER SEAT ASSEMBLY (for 40/20/40 Split Seat Type)

  1. Release the rubber band on the backside of the rear seatback board sub-assembly.

  1. Remove the hog rings.

  1. Remove the 4 bolts and center seat assembly.



9. REMOVE REAR SEATBACK COVER (for 40/20/40 Split Seat Type)


    B115708

  1. Using a moulding remover, disengage the 8 claws and remove the 2 rear seatback covers.



10. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (for 40/20/40 Split Seat Type)


    B112098E01

  1. Release the rubber band on the backside of the rear seatback board carpet assembly.

  1. Disengage the 4 clips and remove the rear seatback board carpet assembly.



11. REMOVE REAR SEAT CUSHION MOULDING RH
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


12. REMOVE REAR SEAT CUSHION MOULDING REAR RH
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


13. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


14. REMOVE REAR SEAT BELT ASSEMBLY INNER


    B109594

  1. Disengage the bolt and remove the rear seat belt assembly inner.



15. REMOVE REAR SEAT HEADREST ASSEMBLY


16. REMOVE REAR SEATBACK LOCK STRIKER COVER
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


17. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


18. REMOVE REAR SEAT HEADREST SUPPORT
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


19. REMOVE REAR SEAT HEADREST SUPPORT
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


20. REMOVE REAR SEATBACK LOCK BEZEL UPPER
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


21. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR (for 40/20/40 Split Seat Type)

  1. Remove the rear seatback lock striker protector.



22. REMOVE REAR SEAT LOCK STRIKER (for 40/20/40 Split Seat Type)

  1. Using a "torx" socket wrench (T45), remove the rear seat lock striker.



23. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD
60/40 Split Seat Type (Click here)
40/20/40 Split Seat Type (Click here)


24. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B109596

  1. Remove the bolt, nut and rear center seat outer belt assembly.