REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL BUMPER MOULDING SET BOLT NO.1


2. INSTALL REAR BUMPER SIDE SUPPORT LH


    B109331E01

  1. Install the rear bumper side support LH with the screw.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



3. INSTALL REAR BUMPER SIDE SUPPORT RH


4. INSTALL REAR BUMPER SIDE RETAINER LH


    B109330E01

  1. Install the rear bumper side retainer LH with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



5. INSTALL REAR BUMPER SIDE RETAINER RH


6. INSTALL REAR BUMPER REINFORCEMENT NO.1


    B111377

  1. Install the rear bumper reinforcement No.1 with the 6 nuts.

    Torque:
    27 N*m{ 275 kgf*cm , 20 ft.*lbf }



7. INSTALL REAR BUMPER ENERGY ABSORBER


8. INSTALL REAR FOG LIGHT ASSEMBLY LH


9. INSTALL REAR FOG LIGHT ASSEMBLY RH