REAR SPOILER > INSTALLATION

for Preparation Click here



1. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY


    I037769

  1. Install the strap to the connector of the high mounted stop light assembly.

    HINT:
    Leave the strap inside the rear spoiler.

  1. Pass the connector through the inside of the rear spoiler and install the high mounted stop light assembly with the 2 screws.



2. INSTALL REAR SPOILER SUB-ASSEMBLY


    B110039

  1. Install the rear spoiler sub-assembly with the 3 clips.

  1. Install the 5 bolts and 2 grommets.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }



    B067937E01

  1. Connect the center stop light connector.



3. INSTALL BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)


4. INSTALL BACK DOOR TRIM BOARD (w/ Power Back Door)


5. INSTALL BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)