ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here



1. REMOVE ROCKER PANEL MOULDING PROTECTOR NO.6


    B068612

  1. Remove the 4 screws and rocker panel moulding protector.



2. REMOVE ROCKER PANEL MOULDING


    B069228E01

  1. Using a screwdriver, remove the 7 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 2 screws.

  1. Using a hexagon wrench, remove the 2 screws.

  1. Disengage the 2 clips and remove the rocker panel moulding.