FRONT DOOR BELT MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY


2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    B112361

  1. Connect each connector.

  1. Engage the 2 claws on the upper part of the outer rear view mirror.

  1. Engage the 2 claws on the lower part of the outer rear view mirror as shown in the illustration, and install the outer rear view mirror.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


7. POWER WINDOW CONTROL SYSTEM INITIALIZATION
(Click here)