REAR DOOR BELT MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY


2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

  1. Connect each connector and the cables.



    B112332E02

  1. Install the rear door trim board sub-assembly with the 13 clips.

  1. Install the 2 screws.

    Torque:
    screw <A>:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. INSTALL REAR DOOR ARMREST COVER


4. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY


5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


6. POWER WINDOW CONTROL SYSTEM INITIALIZATION
(Click here)