REAR BUMPER > REMOVAL

for Preparation Click here



1. REMOVE DECK FLOOR BOX REAR


    B110023

  1. Using a clip remover, remove the 2 clips and deck floor box rear.



2. REMOVE BACK DOOR WEATHERSTRIP


3. REMOVE REAR FLOOR FINISH PLATE


    B111780

  1. Using a clip remover, remove the 2 clips.

  1. Disengage the 2 claws and 6 clips, and remove the rear floor finish plate.



4. REMOVE REAR BUMPER STOPPER UPPER


    B109338

  1. Remove the 2 screws.

  1. Using a screwdriver, remove the rear bumper stopper upper.



5. REMOVE REAR BUMPER ASSEMBLY


    B109327E01

  1. Put protective tape under the quarter panel.

  1. Remove the 2 clips and 4 nuts.

  1. Remove the 8 screws.

  1. Release the 10 claws and the rear bumper assembly.

  1. Disconnect the rear reflector connectors.