RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER


    E068284

  1. Install the No.2 radio bracket with the 3 bolts.



    E068283

  1. Install the No.1 radio bracket with the 3 bolts.



    E111299

  1. Connect the connectors.

  1. Engage the 2 claws and the 2 clips.

  1. Install the radio receiver with bracket with the 4 bolts.



2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER


    B112177

  1. Connect the connectors.

  1. Engage the 2 clips and install the instrument panel finish panel lower.



3. INSTALL CONSOLE PANEL UPPER FRONT


    B112176

  1. Engage the 4 clips and install the console panel upper front.



4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION

NOTICE:
  1. Some systems need initialization when disconnecting the cable from the negative battery terminal. (Click here)