MICROPHONE AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY


    B110371

  1. w/o Sliding roof:
    Using a screwdriver, disengage the 6 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.



    B111799

  1. w/ Sliding roof:
    Using a screwdriver, disengage the 8 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.



    B115594

  1. Using a screwdriver, disengage the claws and open the cover.

    HINT:
    Tape the screwdriver tip before use.



    B111798E01

  1. Using a screwdriver, disengage the claws and open the 2 caps, as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.



    B110372

  1. Remove the 4 screws and map light.

  1. Disconnect the connector.



2. REMOVE MICROPHONE AMPLIFIER


    I045255

  1. Disconnect the connector.

  1. Remove the screw and the microphone amplifier.