WINDOW GLASS ANTENNA WIRE > REPAIR

for Preparation Click here



1. REPAIR WINDOW GLASS ANTENNA WIRE

  1. Clean the broken wire tips with a grease, wax and silicone remover.



    BE00150E01

  1. Place the masking tape along both sides of the wire to be repaired.

  1. Thoroughly mix the repair agent.



    BE00151E01

  1. Using a fine tip brush, apply a small amount of the mixture to the wire.

  1. After a few minutes, remove the masking tape.

  1. Do not repair the defogger wire for at least 24 hours.