BACK DOOR CLOSER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC


    E109251E01

  1. Connect the intelligent tester with CAN VIM to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Read the DTC by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester with CAN VIM to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Erase the DTC by following the directions on the tester screen.

HINT:
Refer to the intelligent tester operator's manual for further details.