FRONT DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR COURTESY SWITCH


    E071371E02

  1. Remove the front door courtesy switch.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    		Switch condition
    		Specified condition
    1 - Switch body
    		Pushed
    		10 kΩ or higher
    1 - Switch body
    		Not pushed
    		Below 1 Ω

    If the result is not as specified, replace the front door courtesy switch.