FRONT ROOM LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT ROOM LIGHT ASSEMBLY


    E069434

  1. Remove the front room light assembly.

  1. Connect the battery positive (+) lead to terminal 2 and negative (-) lead to terminal 3.

  1. Turn the front room light switch in DOOR position.

  1. Check that the light comes on.

  1. Connect the battery positive (+) lead to terminal 1 and negative (-) lead to terminal 3.

  1. Turn the front room light switch in ON position.

  1. Check that the light comes on.

    OK:
    Comes on

    If the light does not come on, replace the front room light assembly.