REAR CONSOLE BOX > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE BOX HOLE COVER


    B108544

  1. Slide the front seat assemblies RH and LH forward.

  1. Slide the console box assembly fully to the back end and remove the console box hole cover.



2. REMOVE CONSOLE BOX NO.2 HOLE COVER

HINT:
Use the same procedures for the console box No.2 hole cover and the console box hole cover.



3. REMOVE REAR CONSOLE BOX


    B108545E02

  1. Separate the console box lock control cable assembly from the rear console box.



    F045693

  1. Keeping the rear console box pulled in the rear direction of the vehicle, remove the 6 bolts from the left and right sides.



    B108546E02

  1. Disconnect each of the clamp and connector.

  1. Remove the rear console box.