The controller Area Network (CAN) is a serial data communication system for real-time application. It is a multiplex communication system designed for on-vehicle use that provides a superior communication speed of 500 kbps and a capability to detect malfunction. Through the combination of the CANH and CANL bus lines, the CAN is able to maintain communication based on differential voltage.
DTC No.
DTC Detecting Condition
Trouble Area
U0293
When Communication with HV Control ECU is interrupted
Wire harness
HV Control ECU
INSPECTION PROCEDURE
Refer to CAN Communication System (for LHD)(Click here). Refer to CAN Communication System (for RHD)(Click here).
