POWER BACK DOOR TOUCH SENSOR > INSPECTION

for Preparation Click here



1. INSPECT POWER BACK DOOR TOUCH SENSOR ASSEMBLY RH


    B070640E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Switch Position
    		Specified Condition
    1 - 2
    		Free
    		Approx. 1 kΩ
    1 - 2
    		Pressed
    		Below 100 Ω



2. INSPECT POWER BACK DOOR TOUCH SENSOR ASSEMBLY LH


    B070640E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Switch Position
    		Specified Condition
    1 - 2
    		Free
    		Approx. 1 kΩ
    1 - 2
    		Pressed
    		Below 100 Ω