POWER STEERING ECU > REMOVAL

for Preparation Click here



1. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE ENGINE ROOM SIDE COVER LH


    A108719

  1. Using a clip remover, remove the engine room side cover.



3. REMOVE INVERTER BRACKET NO.5


    C111474

  1. Remove the bolt and inverter bracket No.5.



4. REMOVE POWER STEERING ECU ASSEMBLY


    C108539

  1. Remove the bolt and ground cable terminal from the power steering ECU assembly.



    C108540

  1. Release the locks of the 2 power steering ECU assembly connectors and disconnect the connectors.



    C112234

  1. Separate the 2 wire harness clamps from the power steering ECU assembly.



    C112235

  1. Remove the 2 bolts and the power steering ECU assembly.