DOOR CONTROL RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


    B106896

  1. Install the door control receiver with the bolt.

  1. Connect the connector.



2. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER


    B111796

  1. Engage the 7 clips and install the roof side garnish assembly inner.



    B111795

  1. Install the 3 clips.

  1. Install the 3 bolts and tonneau cover holder cap.



    B111797

  1. Engage the 4 claws and install the seat belt bezel.



3. INSTALL NO.2 ROOM LIGHT ASSEMBLY


    B111794

  1. Connect the connector.

  1. Engage the claw and install the room light assembly No.2.



4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY


    B111793

  1. Engage the 2 clips and install the deck trim side panel assembly.

  1. Install the 4 clips.



5. INSTALL ROPE HOOK

  1. Install the 2 rope hooks with the 2 bolts.

    Torque:
    8.0 N*m{ 80 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure to install the other side.



6. INSTALL REAR FLOOR FINISH SIDE PLATE


    B111792

  1. Engage the 2 clips and install the rear floor finish side plate.

  1. Install the clip.



7. INSTALL REAR SEAT SIDE COVER


    B111791

  1. Engage the 4 clips and install the rear seat side cover.

  1. Install the 3 clips.



8. INSTALL REAR NO.1 SEAT BELT ASSEMBLY OUTER

  1. Install the rear No.1 seat outer belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



9. INSTALL DECK SIDE TRIM COVER


    B111808

  1. Engage the 5 claws and install the deck side trim cover.



10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP


11. INSTALL REAR DOOR SCUFF PLATE


    B111783

  1. Connect the connector. (w/ illumination scuff plate)

  1. Engage the 4 claws and 2 clips, and install the rear door scuff plate.



12. INSTALL DECK SIDE TRIM BOX LH


    B111781

  1. Install the deck side trim box with the 2 clips.



13. INSTALL DECK SIDE TRIM BOX RH


14. INSTALL REAR FLOOR FINISH PLATE


    B110477

  1. Engage the 2 claws and 6 clips, and install the rear floor finish plate.

  1. Install the 2 clips.



15. INSTALL BACK DOOR WEATHERSTRIP


16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY


    B110025

  1. Install the deck No.3 board sub-assembly with the 2 bolts and 2 nuts.



17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY


    B110024

  1. Install the deck No.2 board sub-assembly with the 4 bolts and 2 nuts.



18. INSTALL DECK FLOOR BOX REAR


    B110023

  1. Install the deck floor box rear with the 2 clips.



19. INSTALL DECK FLOOR BOX FRONT


    B110022

  1. Install the deck floor box front with the 2 clips.



20. INSTALL DECK BOARD SUB-ASSEMBLY


    B110455

  1. Install the deck board sub-assembly with the 2 bolt.

  1. Engage the 5 clips.



21. INSTALL TONNEAU COVER ASSEMBLY