POWER BACK DOOR SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.


Power back door ECU 
DISPLAY (ITEM)
DEFAULT
CONTENTS
SETTING
PBD SW Operation
0.8s
Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec.
0.8s/ON
PBD Buzzer Volume
LARGE
Function that adjusts the volume of warning buzzer that notifies power back door is operating
OFF/SMALL/LARGE
Wireless PBD Operation
0.8s
Function that operates power back door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.-press or OFF*1)
ON/TWICE ON/0.8s/OFF
PBD Assist Open*2
OFF
Function that helps power back door opening operation
ON/OFF

HINT:
  1. *1: Wireless (transmitter switch) operation of the power back door is disabled.
  2. *2: When this item is set to ON:
    When the back door is fully closed, pulling the back door opener switch (outside handle switch) activates the power back door system to automatically open the back door after it is unlatched.