FOG LIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FOG LIGHT RELAY


    B016200

  1. Remove the fog light relay

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		Switch position
    		Specified condition
    3 - 5
    		Always
    		10 kΩ or higher
    3 - 5
    		When battery voltage is applied to terminal 1-2
    		Below 1 Ω

    If the result is not as specified, replace the fog light relay.