TAILLIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT TAILLIGHT RELAY


    B016200

  1. Remove the taillight relay

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		Switch position
    		Specified condition
    3 - 5
    		Always
    		10 kΩ or higher
    3 - 5
    		When battery voltage is applied to terminal 1-2
    		Below 1 Ω

    If the result is not as specified, replace the taillight relay.