DTC    61-40    Mechanical Error of Media

DTC    61-41    Eject Error

DTC    61-42    Tape Tangling

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Areas
61-40
A malfunction due to mechanical problem has occurred, cassette tape is cut or entangled.
  1. Cassette tape
  2. Radio receiver
61-41
A malfunction due to mechanical problem.
61-42
Cassette tape is tangled.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.PRESS "EJECT" AND CHECK OPERATION

  1. Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.

    OK:
    Cassette tape is ejected.



NG
REPLACE RADIO RECEIVER
OK


2.CHECK CASSETTE TAPE

  1. Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.

    OK:
    No problem with cassette tape.



NG
CASETTE TAPE IS FAULTY
OK


3.REPLACE CASETTE TAPE WITH ANOTHER AND RECHECK

  1. Replace the cassette tape with a normal one and check if the same problem occurs again.

    1. Clear the DTC (Click here).

    2. Recheck DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE RADIO RECEIVER
OK

CASETTE TAPE IS FAULTY