DTC    61-43    Head Dirt

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Areas
61-43
Head is dirty
Radio receiver

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CLEAN HEAD AND CHECK OPERATION


    I100153E03

  1. Head cleaning

    1. Raise the cassette door with your finger. Using a pencil or similar object, push in the guide.

    2. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

    3. Clear the DTC (Click here).

    4. Recheck DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE RADIO RECEIVER
OK

HEAD IS DIRTY