DTC 62-41 Wrong Disc |
DTC 62-42 Disc cannot be Read |
DTC 63-41 Wrong Disc |
DTC 63-42 Disc cannot be Read |
| DTC No. | DTC Detection Condition | Trouble Areas |
| 62-41 | An unsuitable disc is inserted. |
|
| 62-42 | The disc cannot be read. | |
| 63-41 | An unsuitable disc is inserted. | |
| 63-42 | The disc cannot be read. |
| 1.DISC CLEANING |
![]() |
Disc cleaning
If dirt is on the disc surface, wipe it with a soft cloth from inside to outside in a radial direction.
| NEXT | |
| 2.CHECK DISC |
![]() |
Check that the disc is not deformed or cracked.
|
| ||||
| OK | |
| 3.REPLACE DISC WITH ANOTHER AND RECHECK |
Replace the disc with another and recheck.
Replace the disc with another normal one.
Clear the DTC (Click here).
Recheck DTCs and check if the same trouble occurs again.
|
| ||||
| OK | ||
| ||