BRAKE ACTUATOR > INSPECTION

for Preparation Click here



1. INSPECT BRAKE ACTUATOR ASSEMBLY


    F047491E02
  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    Specified Condition
    37 (SMC1) - 36 (BS1)
    15.3 to 17.3 Ω
    19 (SMC2) - 20 (BS2)
    15.3 to 17.3 Ω
    44 (SLAFR+) - 43 (SLAFR-)
    3.6 to 4.2 Ω
    28 (SLRFR+) - 27 (SLRFR-)
    3.6 to 4.2 Ω
    35 (SLAFL+) - 38 (SLAFL-)
    3.6 to 4.2 Ω
    21 (SLRFL+) - 22 (SLRFL-)
    3.6 to 4.2 Ω
    41 (SLARL+) - 42 (SLARL-)
    3.6 to 4.2 Ω
    25 (SLRRL+) - 26 (SLRRL-)
    4.4 to 5.0 Ω
    39 (SLARR+) - 40 (SLARR-)
    3.6 to 4.2 Ω
    23 (SLRRR+) - 24 (SLRRR-)
    4.4 to 5.0 Ω
    32 (BM2) - 1 (GND1)
    Below 10 Ω
    31 (BM1) - 1 (GND1)
    Below 10 Ω
    32 (BM2) - 31 (BM1)
    Below 1 Ω
    1 (GND1) - 2 (GND2)
    Below 1 Ω
    32 (BM2) - 3 (MTT)
    About 33 Ω
    31 (BM1) - 3 (MTT)
    About 33 Ω