REAR CIRCUIT BREAKER SENSOR > INSPECTION

for Preparation Click here



1. INSPECT REAR CIRCUIT BREAKER SENSOR LH


    A112780E01

  1. Measure the resistance according to the value in the table below.

    Standard Resistance:
    Tester Connection
    		Specified Condition
    1(SCR-) - 2(SCR+)
    		0.65 to 1.0 kΩ at 20°C (68°F)



2. INSPECT REAR CIRCUIT BREAKER SENSOR RH


    A112781E02

  1. Measure the resistance according to the value in the table below.

    Standard Resistance:
    Tester Connection
    		Specified Condition
    1(SCR-) - 2(SCR+)
    		0.65 to 1.0 kΩ at 20°C (68°F)