ELECTRIC INVERTER COMPRESSOR > INSPECTION

for Preparation Click here



1. INSPECT ELECTRIC INVERTER COMPRESSOR


    E109283E05

  1. Disconnect the connector from the electric inverter compressor (A).

  1. Using a megohm tester, measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    		Condition
    		Specified condition
    A-1 (PGND) - Body ground
    		Always
    		2 MΩ or higher
    A-2 (PBAT) - Body ground
    		Always
    		2 MΩ or higher