REAR WIPER MOTOR > INSPECTION

for Preparation Click here



1. REAR WIPER MOTOR ASSEMBLY


    E069438E01

  1. Connect the positive battery (+) to the terminal 1 (+B) of the connector, the negative battery (-) to the terminal 3 (LS) and rear wiper motor assembly body, and check that the rear wiper motor assembly operates.



    E068143E01

  1. Automatic Stop Position Operation Check

    1. Connect the positive battery (+) lead to the terminal 1 (+B) of the connector, the negative battery (-) to the terminal 3 (LS) and rear wiper motor assembly body. With the motor being rotated disconnect the terminal 3 (LS) from the battery (-), then check that the wiper motor stops automatically at the automatic stop position.