Tester connection
| Condition
| Specified condition
|
A30-1 (+1) - Body ground
| Front wiper is in LO speed operation
(when front wiper switch is in AUTO position)
| 10 to 14 V
|
A30-2 (+2) - Body ground
| Front wiper is in HI speed operation
(when front wiper switch is in AUTO position)
| 10 to 14 V
|
A30-5 (+SM) - Body ground
| Front wiper motor is OFF → ON
| Below 1 V → 10 to 14 V
|
A30-6 (2S) - Body ground
| Front wiper switch OFF → HI
| 10 to 14 V → Below 1 V
|
A30-7 (1S) - Body ground
| Front wiper switch OFF → LO
| 10 to 14 V → Below 1 V
|
A30-8 (ES) - Body ground
| Always
| Below 1 V
|
A30-10 (WIG) - Body ground
| Ignition switch OFF → ON
| Below 1V → 10 to 14 V
|
A31-1 (MPX1) - Body ground
| Ignition switch OFF → ON
| Signal waveform
|
A31-3 (VR1) - Body ground
| Ignition switch OFF → ON
| Below V → 5 V
|
A31-6 (FWAS) - Body ground
| Front washer switch OFF → ON
| 10 to 14 V → Below 1 V
|
A31-7 (AUTO) - Body ground
| Front washer switch OFF → AUTO
| 10 to 14 V → Below 1 V
|
A31-8 (+B) - Body ground
| Always
| 10 to 14 V
|
A31-9 (VR2) - Body ground
| Always
| Below 1 V
|
A31-12 (E) - Body ground
| Always
| Below 1 V
|
