HYBRID BATTERY SYSTEM > FREEZE FRAME DATA

for Preparation Click here



FREEZE FRAME DATA

HINT:
The HV control ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored. It is used for estimating or simulating the vehicle conditions when the malfunction occurred.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position and turn the intelligent tester on.

  3. Select the following menu items: Powertrain / Hybrid Control / DTC.

  4. Read output DTCs.

  5. Check the freeze frame data of the detected DTCs.

    HINT:
    For the freeze frame data chart (Click here).