DTC    P3108-594    A/C Amplifier Communication Circuit Malfunction

for Preparation Click here


DESCRIPTION

Since the A/C amplifier is connected to BEAN, the HV control ECU communicates with the amplifier using CAN via the network gateway ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P3108
594
CAN communication problem
CAN communication system

INSPECTION PROCEDURE

1.READ OUTPUT DTC (CAN BUS CHECK)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to the ON position.

  1. Select the following menu items: Powertrain / Hybrid Control / DTC.

    HINT:
    If DTCs other than CAN communication problem DTCs are output simultaneously, first solve the CAN communication problem, and then perform troubleshooting for other DTCs.


NEXT

GO TO CAN COMMUNICATION SYSTEM