OIL PUMP > REMOVAL > Preparation
 | 09032-00100 | Oil Pan Seal Cutter |
 | 09213-54015 | Crankshaft Pulley Holding Tool |
 | (91651-60855) | Bolt |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09520-01010 | Drive Shaft Remover Attachment |
 | 09520-24010 | Differential Side Gear Shaft Puller |
 | (09520-32040) | Shocker Set |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05011) | Claw No.1 |
 | (09954-05031) | Claw No.3 |
 | 09040-00010 | Hexagon Wrench Set . |
 | (09043-20100) | Socket Hexagon Wrench 10 |
| Deep socket wrench 24 mm | |
| Torque wrench | |
| Feel gauge | |
| Precision straight edge | |
| Slide calipers |
| Item | Capacity | Classification |
| Oil grade | - | API grade SL Energy - Conserving or ILSAC multigrade engine oil |
| Drain and refill with oil filter change | 4.7 liters (5.0 US qts, 4.1 lmp. qts) | - |
| Drain and refill without oil filter change | 4.5 liters (4.8 US qts, 4.0 lmp. qts) | - |
| Dry fill | 5.5 liters (5.8 US qts, 4.8 lmp. qts) | - |
| 08826-00080 | Seal Packing Black or equivalent (FIPG) | ||
| 08833-00080 | Adhesive 1344 THREE BOND 1344 LOCTITE 242 or equivalent |