RX400h · Service Manual BRAKE

REMOVAL

Removal / installation


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

3. DISCONNECT REAR FLEXIBLE HOSE

  1. Remove the union bolt and the gasket from the rear disc brake cylinder assembly, then disconnect the flexible hose.


4. REMOVE REAR DISC BRAKE CYLINDER SLIDE PIN NO.2

  1. G021633
    Remove the rear disc brake cylinder slide pin No.2.


5. REMOVE REAR DISC BRAKE CYLINDER SLIDE PIN NO.1

  1. Remove the rear disc brake cylinder slide pin No.1.


6. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

  1. F045897
    Remove the rear disc brake cylinder assembly.

← COMPONENTSDISASSEMBLY →