RX400h · Service Manual BODY ELECTRICAL

CD cannot be Inserted / Played or CD is Ejected Right After Insertion

Circuit diagnosis

INSPECTION PROCEDURE


1. CHECK IF A PROPER CD IS INSERTED
  1. Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or other defective.

    OK:
    Normal audio CD.

    HINT:
    1. Translucent or uniquely-shaped CDs cannot be played.
    2. CDs for personal computers (with music recorded in) and CD-Rs cannot be played.



NG
CD IS FAULTY
OK


2. CHECK THAT CD IS INSERTED PROPERLY
  1. Check whether or not the CD is inserted upside down.

    OK:
    CD is properly inserted.



NG
SET CD PROPERLY
OK


3. CHECK CD
I100151
  1. Clean the disc by wiping it radially with a soft cloth.

    OK:
    Malfunction disappears.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
Go to step 4
OK

CD WAS DIRTY

4. REPLACE CD WITH ANOTHER AND RECHECK
  1. Replace the CD with a normal one and check if the same problem occurs.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER
OK

CD IS FAULTY


← CD cannot be EjectedCD Sound Skips →