Cassette Tape cannot be Ejected

INSPECTION PROCEDURE

1. PRESS "EJECT" AND CHECK OPERATION

1. Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.

   OK:

   Cassette tape is ejected.
   

NG	REPLACE RADIO RECEIVER

OK

2. CHECK CASSETTE TAPE

1. Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.

   OK:

   No problems with cassette tape.
   

NG	CASSETTE TAPE IS FAULTY

OK

3. REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

1. Replace the cassette tape with a normal one and check if the same problem occurs.

   OK:

   Malfunction disappears.
   

NG	REPLACE RADIO RECEIVER

OK
CASSETTE TAPE IS FAULTY