CUSTOMIZE PARAMETERS
Troubleshooting
- HINT:
- The following items can be customized.
- NOTICE:
- After confirming whether the items of the customer's request is applicable or not for the customized items, perform the customize operation.
- Be sure to record the current value before customizing.
- In case of performing the troubleshooting, pay attention as there is a possibility that the function is OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation is not OFF by customizing, then perform the troubleshooting.)
- After confirming whether the items of the customer's request is applicable or not for the customized items, perform the customize operation.
| Display (Item) |
Default |
Contents |
Setting |
| SPEED MODE (Speed mode) |
Avail |
Function to change to the intermittent operation when the vehicle comes to a stop ( 0 vehicle speed) from running condition in case that the wiper switch is at the LO position. |
NOT AVAIL / AVAIL |
| AUTO WIPER (Auto wiper) |
Avail |
Function to operate the wiper automatically when it is raining. |
NOT AVAIL / AVAIL |
| REWIPE CONTROL (Rewipe control) |
SPD MOD |
Function to change time until operating the wiper to prevent dropping after having used the washer. |
OFF / 3 s / SPD MOD |